OHR New Catalog

---------

From: Chuck Adams (adams@chuck.dallas.sgi.com)
Date: Tue Apr 05 1994 - 00:31:15 EDT


   
   
   Gang,
   
   Here is the latest info that I just received today
   from Oak Hills Research (OHR). They now have a new
   catalog, 94A, 18 pages including cover and two pages
   (one sheet) for ordering.
   
   Oak Hills Research
   QRP Headquarters
   20879 Madison Street
   Big Rapids, MI 49307
   
   (616) 796-0920
   (616) 796-1460 both numbers for ordering
                  during normal business hours
   
   (616) 796-6633 (24 hour FAX line)
   
   Here are the kits and information (FYI):
   
   ---------------------------------------
   
          QRP Classic Dual Band CW Transceiver (NEW)
   
   o Dual band transceiver kit for the 20M & 40M bands
   o Superhet receiver design with diode ring mixer & RF pre-amp
   o High side LO injection on both bands for a cleaner signal
   o 4 pole crystal ladder filter
   o 4 pole audio filter
   o AGC circuit
   o VFO tuning with 8:1 vernier dial covering 100KHz
   o RIT w/center detent control providing +/- 1 KHz of range
   o Sidetone oscillator w/level control
   o Silky smooth QSK circuit
   o 4-5 watts of RF output on both bands
   o TX output power adjustable from 0 to full output
   o Both Iambic and manual key jacks provided
   o 12 VDC operation - Current drain is 290mA on RX and 1.2A on TX
   o Measures (HWD): 4" X 6 1/4" X 6 7/8" and weighs 48 oz.
   o 100% complete kit - All coils are prewound
   o All panels prepunched for optional Iambic keyer
   
   o CAT # CL2040 .................. $260.95
   o CAT # KEY1 Opt Iambic Keyer Kit $ 39.95
   
   
   --------------------------------------------------------
   
               QRP Spirit CW Transceiver
   
   o Single band transceiver kit offered on 80, 40, 30, 20, & 15 meters
   o Iambic keyer included using latest Curtis Keyer Chip 8044ABM
   o Superhet receiver design with diode ring mixer & RF pre-amp
   o 4 pole crystal ladder filter
   o 4 pole audio filter
   o Switchable AGC circuit with manual RF gain control
   o VFO tuning with 8:1 vernier dial covering 100 KHz (50 KHz on 30M)
   o RIT w/center detent control providing +/- 1 KHz range
   o Sinewave sidetone oscillator w/frequency & level controls
   o Silky smooth QSK circuit
   o 4-5 watts of RF output on all bands
   o Both Iambic and manual key jacks provided
   o 12 VDC operation - Current drain is 270mA on RX and 1.2A on TX
   o Measures (HWD): 4" X 6 1/4" X 6 7/8" and weighs 47 oz.
   o 100% complete kit - All coils are pre-wound
   
   o CAT # SP-1 /BAND (Please specify band) ............ $219.95
   
   ---------------------------------------------------------
   
   QRP EXPLORER CW Transceiver (NEW)
   
   o Single band transceiver kit offered on 20M or 40M band
   o Single signal superhet receiver design
   o 4 pole crystal ladder filter
   o Very effective 2 pole front panel selectable audio filter
   o Effective AGC circuit
   o VFO tuning with 8:1 vernier dial covering 100 KHz
   o RIT w/center detent control providing +/- 1 KHz of range
   o Sidetone oscillator w/level control
   o Silky smooth QSK circuit
   o 4-5 watts of RF output on both bands
   o 12VDC operation - Current drain is 90mA on RX and 1.0A on TX
   o Measures (HWD): 2 1/2" X 6 1/2" X 7" and weighs 32 oz
   o 100% complete kit - All coils are pre-wound
   
   o CAT # EX20 20M KIT .................. $159.95
   o CAT # EX40 40M KIT .................. $159.95
   
   ---------------------------------------------------------
   
   QRP Sprint CW Transceiver
   
   o W7EL Optimized QRP CW Transceiver
   o Available on 30M or 40M band
   o Receiver front-end bandpass filter for improved performance
   o High performance DC receiver
   o Diode ring mixer
   o VFO tuning with 8:1 vernier dial covering 100 KHz (50KHz on 30M)
   o RIT w/center detent control providing +/- 700 Hz of range
   o Bandpass type audio filter
   o Sidetone oscillator
   o Silky smooth QSK circuit
   o 1.5 watts of RF output
   o 12 VDC operation - Current drain is 40mA on RX and 240mA on TX
   o Measures (HWD): 2 1/2" X 5" X 5" and weighs 18 oz.
   o 100% complete kit - All coils are pre-wound
   
   o CAT # SPRINT 30 30M KIT ................... $119.95
   o CAT # SPRINT 40 40M KIT ................... $119.95
   
   ----------------------------------------------------------
   
                   QRP Wattmeter
   
   o A wattmeter designed specifically for the QRP operator & builder
   o Measures forward & reflected power at QRP levels
   o Select from three full scale power levels: 10W, 1W or 100mW
   o Measures power down to 5mW
   o Large easy to read 3" meter
   o Low current drain meter circuit uses 9V battery
   o Great for portable use
   o Easy to build & align
   o Align with digital voltmeter. Source of RF is not required
   o Measures (HWD): 4 1/2" X 3 1/2" X 5"
   o 100% complete kit (less battery)
   
   o CAT # WM-1 .................. $89.95
   
   -------------------------------------------------------
   
   Shipping charges are as follows: To addresses in the U.S. and its
   possessions: $4.50. To Canada: $7.00 + $1.75 for insurance if
   desired. All other foreign orders: 20% of order. Orders to
   addresses in the Continental U.S. are shipped via UPS, therefore
   a street address needed. All other orders are shipped First Class
   mail or Air Mail Parcel Post insured.
   
   -----------------------------------------------------
   
   The above typed in by Chuck K5FO for the information exchange
   on the QRP network. Hopefully typed in without error, but no
   guarantees. I may be a UIL typing champion at 88wpm, but that
   was years ago. :-) Not for advertising purposes, but information
   only. There are also pages of parts, too numerous to list here.
   I'll find out charge for catalog. Probably $2.00, since it cost
   $0.52 to ship first class. Don't be cheap here guys, help
   'em out.
   
   I noted the new dial on the WM-1 wattmeter. This critter
   is my most prized possession of the QRP equipment that I
   own. It's just the thing needed for adjusting transmitters,
   antennas, etc. for the best output adjustments of equiment.
   
   I don't know about this gang, but there are just too many
   toys to play with now. :-)

   Oh, Dick, KE8KL, owner of OHR, has eliminated a lot of fun
   in building his kits by providing the toroids already wound.
   Heck, it's getting too easy. :-)

   dit dit

Chuck Adams K5FO CP-60
adams@sgi.com


Search QRP-L Archives

[ QRP-L Archive | ]
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]

---------

This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:26:43 EDT

kd4ab@kd4ab.org