From: Mugleston, Brad (email@example.com)
No the project is really a bunch of smaller projects - I've got the parts
just no boards.
Thanks I'll check with goldmine.
From: Chuck Adams [mailto:firstname.lastname@example.org]
Sent: Tuesday, June 10, 2003 4:18 PM
To: email@example.com; Low Power Amateur Radio Discussion
Subject: Re: Scrap double sided circuit board
You might want to go to
and look for PC board material there. I have been using them for a couple
of years and you can also get the standard sizes for reasonable prices.
Be sure to note the thickness of the boards. The real thin stuff isn't very
sturdy if you are going to make cases, etc. but it words great for ground
for Manhattan projects and really lightens the weight of the final project.
You didn't say what size the project was so I'm guessing it isn't real
Chuck Adams K7QO firstname.lastname@example.org
Search QRP-L Archives
QRP-L Archive |
[ 1993| 1994| 1995| 1996| 1997| 1998| 1999| 2000| 2001| 2002| 2003 ]
This archive was generated by hypermail 2b29 on Sun Jun 29 2003 - 13:30:07 CDT