Re: tube pwr supply info needed

---------

From: W2SH@aol.com
Date: Wed Aug 22 2001 - 17:19:24 CDT


Jim,

www.fairradio.com lists a 6.4volt @6.4 amp (these identical numbers suggest a
possible misprint) filament transformer with a 115Vac primary for $6.95 each.
 Get a couple of these. Wire them up back-to back, i.e., connect the two low
voltage secondaries together. Pick off your needed filament voltage at the
back-to-back junction. Connect one of the primaries to a half wave
rectifier, plus filtering components, to satisfy your dc requirement. Plug
the other primary into the wall and play!

72/73,

Charles, W2SH


Search QRP-L Archives

[ QRP-L Archive | ]
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 | 2001 ]

---------

This archive was generated by hypermail 2b29 on Fri Oct 05 2001 - 09:30:47 CDT

kd4ab@kd4ab.org