Norcal 20 questions Redux part 2

---------

From: Mike Morrell (morrellm@ameritech.net)
Date: Wed Aug 22 2001 - 06:53:12 CDT


Tnx to all for helping me resolve my questions regarding the
pot. fitting etc. The main problem was that the " detent" pot
supplied had round, solder lugs ( not pins). This required some
rebending/cutting to allow the pot to sit into the hole pattern
on the PCB. Further I was making the fitting of my 10 turn Bourns
pot way too difficult. One I realized this, everything fits
nicely, components are now insertable, and the front panel only
required the enlargement of the tune hole to allow passage of
the larger ferrule on the 10t pot. Again , tnx to all.

Lastly, are there any " must do " mods to this rig? If so, where
can I get them from ?

Regards,

Mike - K8KE


Search QRP-L Archives

[ QRP-L Archive | ]
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 | 2001 ]

---------

This archive was generated by hypermail 2b29 on Fri Oct 05 2001 - 09:30:47 CDT

kd4ab@kd4ab.org