Re: Touch Sensitive Key(er)

---------

From: John J. McDonough (jjmcd@tm.net)
Date: Sat Oct 16 1999 - 12:58:23 EDT


Bill

Look on page 5 of your 706 manual. The straight key should be connected to
the tip.

72/73 de WB8RCR http://www.qsl.net/wb8rcr/
didileydadidah QRP-L #1446 Code Warriors #35

-----Original Message-----
From: Bill H Ross <k6mgo@juno.com>
To: Low Power Amateur Radio Discussion <qrp-l@Lehigh.EDU>
Date: Saturday, October 16, 1999 12:54 PM
Subject: Touch Sensitive Key(er)

>Just completed the touch keyer on Franks web page. (breadboard of course)
>.
>Seems to be working, hooked a volt meter up to the Tx side of the diode
>and when I touch both contacts, I get a small (about 0.3v) out.
>Now to hook it up to a transmitter. From the single output lead, it's got
>to be straight key only.
>
>My problem is, nowhere that I can find in my Icom 706 manual, is a wiring
>diagram for the keys.
>Should I connect the output of the keyer to the TIP, or RING, or should I
>short the two together?
>Any help would be appreciated.
>73/72 Bill, K6MGO


Search QRP-L Archives

[ QRP-L Archive | ]
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]

---------

This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:42:22 EDT

kd4ab@kd4ab.org