From: Bill H Ross (email@example.com)
Just completed the touch keyer on Franks web page. (breadboard of course)
Seems to be working, hooked a volt meter up to the Tx side of the diode
and when I touch both contacts, I get a small (about 0.3v) out.
Now to hook it up to a transmitter. From the single output lead, it's got
to be straight key only.
My problem is, nowhere that I can find in my Icom 706 manual, is a wiring
diagram for the keys.
Should I connect the output of the keyer to the TIP, or RING, or should I
short the two together?
Any help would be appreciated.
73/72 Bill, K6MGO
Search QRP-L Archives
QRP-L Archive |
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]
This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:42:22 EDT