Claton, I do not have my 730 manual at hand right now, but as I recall
the 730 (like most Icom rigs) has two pots that set the maximum and the
minimum power output as the rf output control is varied between max and
min.
Look at your manual at the chassis/pcb photos and the schematic and see
if you can identify these pots and their locations.
This really isn't a mod - just a routine adjustment.
Good luck.
Claton Cadmus wrote:
>
> I need to know how to modify an Icom IC-730 to reduce low power down to 5
> watts, currently the lowest output is 10 watts. I know this can be done on
> a 735, anybody done it on the 730?
>
> Thanks
> ----
> 73 de KA0GKC Claton Cadmus
> cla@spacestar.net
> MNQRP #1
> Minnesota QRP'ers we're looking for you!
> Email me or visit this page http://www.qsl.net/mnqrp
-- 73, George Amateur Radio W5YR QRP-L #1373 AutoPOWER Systems Fairview, TX
[
QRP-L Archive |
]
[
1993 |
1994 |
1995 |
1996 |
1997 |
1998 |
1999 |
2000
]