William H. Launer <launerb@crl.com> writes:
: I disconnected it, and
: discovered that the female contacts in the SO-239 connectors were a very
: loose fit on the male PL-259 plugs.
PL-259/SO-239's can be very reliable. The above condition is the result
of inserting poorly soldered PL-259's. Make sure you don't get any solder
on the outside of the PL-259 center pin and if you do remove it. This
excess solder is almost always the cause of SO-239 failures.
Hope this Helps.
---- 73 de KA0GKC Claton Cadmus E-mail cla@spacestar.net TCP/IP ka0gkc@ka0gkc.ampr.org Ask me about the Minnesota QRP Society! http://www.spacestar.net/users/aplitech/mnqrp/
[
QRP-L Archive |
]
[
1993 |
1994 |
1995 |
1996 |
1997 |
1998 |
1999 |
2000
]