> boy.. I about give up
>
> was real careful building the AT-11. check everything a number of
> times both before and after building it.
>
> when I power it on, seems like all the relays active. seems to be
> using about 250 ma or so.. but really can't tell.. then the relays
> go for about 2-3 seconds..then turn off and it seems to be drawing
> about 400 ma at that point.
>
> I tried disconnecting all the mods . still same.. same with 14 pin
> connector connected or not.. can't find any solder bridges.. used
> a high power magnifying glass. can't find any parts in wrong..
> pulled out one relay transistor.. it is fine.. they all measure
> ok.. pulled out U2? the near the processor.. still same thing even
> with it out of the board.
>
> any suggestions?
>
> help will be VERY appreciated.
> thanks
>
> Jeff
[
QRP-L Archive |
]
[
1993 |
1994 |
1995 |
1996 |
1997 |
1998 |
1999 |
2000
]