Thanks, Scott, for arranging the group buy.
My QRP and QRO kits are here and in good condx.
My thoughts on assembly so far:
I'm about halfway done with the QRO board.
The leads on D20 1N4001 are too big for the holes.
I used old resistor leads to solder into the holes, then
soldered the resistor leads to D20.
The assembly manual says to wind the toroids first,
but I'm not going to wind them until time to put them
onto the board (almost last), so they don't lay around
on the bench and get all badgered up.
Marcus, KR5N
[
QRP-L Archive |
]
[
1993 |
1994 |
1995 |
1996 |
1997 |
1998 |
1999 |
2000
]