Re: MFJ Accessories

---------

From: Robert J. Gobrick (rgobrick@public.compusult.nf.ca)
Date: Tue Aug 01 1995 - 21:31:22 EDT


Craig,

You are becoming one heluva qrp hardware hacker - good job..

73/72 Bob VO1DRB/WA6ERB

>I just installed the keyer in my 9030. While I had the soldering iron out to
>change the jumper to Curtis B, I modified the board to re-wire the paddle jack.
>With an Exacto knife, I cut the two traces between the connector and the dit
>and dah input pins on the chip. Then I soldered two small jumper wires to
>"criss-cross" these leads.
>
------------------------------------------------------------------------------

        Bob Gobrick - VO1DRB/WA6ERB/VE2DRB - Newfoundland, Canada
        QRPer Galore - ARCI, GQRP, NORCAL, NEQRP, COQRP, MIQRP, NWQRP

        Internet: rgobrick@public.compusult.nf.ca
                     bgobrick@terra.nlnet.nf.ca
      
        Compuserve: 70466.1405@compuserve.com

-------------------------------------------------------------------------------


Search QRP-L Archives

[ QRP-L Archive | ]
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]

---------

This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:28:22 EDT

kd4ab@kd4ab.org