From: Rick Zabrodski (email@example.com)
I have built the tuner in question. Works fine. Plan to use this design
in my own "personal" qrp omni box.
Dr. Rick Zabrodski BSc, MD, CCFP(E) * VE6GK
Email: firstname.lastname@example.org * NorCal 519 ARCI 7650 GQRP 8329
Phone 403-271-5123 Fax 403-225-1276 * "Power is no substitute for skill"
On Thu, 11 May 1995 email@example.com wrote:
> Those interested in the Z-Match may wish to look at the Winter, 1995
> Comunications Quarterly, pp 27-32, for Charles Lofgren, W6JJZ, "Beyond
> the Z-Match: The IBZ Coupler." JJZ uses a single coil assembly with
> switched taps, plus switching for single-ended and balanced output.
> IBZ="improved balance Z-match," because he adds a 1:1 balun at the input
> end to improve the balance of the output ("under some conditions"). The
> link-coupled coil assembly goes on a T-225-6 core. THe link capacitor is
> a BC variable, while the other capacitor is a 500 pF/section 4-section
> surplus unit with wide-spaced plates.
(You can switch in fixed capcitors if needed, I did this with my "protype")>
Search QRP-L Archives
QRP-L Archive |
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]
This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:28:02 EDT