Re: wooden radios/brads/tacks

---------

From: Randy (randy@cyphyn.radnet.com)
Date: Mon Nov 22 1993 - 11:27:00 EST


Oh my! Brads for solder-terms! For the crude stuff. I've done that, and
I've used carpet tacks as well.

I thought I was the only one who'd do such a thing!

Whew! I feel much better now!

For the 'fancy' ones...meant to not elicit a "pleagh" sound out of any
observers, I've used brass wood screws and washers...fahnstock clips*
and even plain steel screws...pan head sheet metal ones are best for
that...due to the head being wider-grips the wires better.

---
Well, I've come to a point here today, where I need decide....

Shall I change over to using a single 6AG7 tube/osc-output ...get 3/4 watt and so use a B+ for which I have xformers for....and can be fully self- contained ( B+ and RF guts in same chassie..or all one one wood base)

Or use 6SJ7 osc and 6V6 final, for 3 watts out... using B+ I will need get xformer for....needing 2nd chassie/or wood base item to hold B+ on. ---which will get a metal chassie ( I have) for the RF part. -- Randy KA1UNW If you get a shock while servicing your equipment, "Works for me!" randy@192.153.4.200 DON'T JUMP! -Peter Keyes You might break an expensive tube!


Search QRP-L Archives

[ QRP-L Archive | ]
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]

---------

This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:26:21 EDT

kd4ab@kd4ab.org