From: Brad Mitchell (bmitchel@Kodak.COM)
Ok, I admit, I wasn't very clear (at all).
lets go thru this one step at a time.
1. you see a project in 73 magazine you want to build
2. you need a board
3. you buy the board.... not!!!!
4. You ftp to some workstation on the network, and down load the artwork,
5. You then print the artwork onto a dyna-art paper or Tech-200 film with
a laser printer, throw it in the etch, and you are done.
That's the final goal anyway, that Gary was eluding to.
The assumption is that you have access to a laser printer, (or good copier)
you have access to the network, other than mail. ie. ftp.
Also the other assumption is that the artwork is a mirror image! This may not
be obvious but it's true.
73 Brad WB8YGG
Search QRP-L Archives
QRP-L Archive |
[ 1993 | 1994 | 1995 | 1996 | 1997 | 1998 | 1999 | 2000 ]
This archive was generated by hypermail 2b29 on Fri Jun 02 2000 - 11:26:11 EDT